eDAQ Amps |
 |
eDAQ's fully software-controlled Amplifiers
eDAQ produces a variety of amplifiers designed to work specifically with e-corder units. eDAQ Amps become an extension of the e-corder system, and are fully controlled by software.
All eDAQ Amps draw power from the e-corder unit via a proprietary I2C interface which also facilitates software recognition and control of the amplifier operation. You can operate multiple eDAQ Amps on the one e-corder unit.
 |
Potentiostat | a three electrode potentiostat that can be used for voltammetric and amperometric experiments |
|
Picostat | a high-sensitivity three electrode potentiostat suitable for use with carbon fibre and other microelectrodes |
|
QuadStat | a four-channel potentiostat that can operate each channel independently in three electrode mode, or operate two (bipotentiostat), three or four working electrodes with a common reference and auxiliary electrode |
|
C4D Amp | a capacitively-coupled contactless conductivity detector (C4D) for capilliary electrophoresis and ion chromatography systems. |
eDAQ Pods |
|
eDAQ Pods are miniature amplifiers
eDAQ Pods are our series of miniature amplifiers
isoPods™ are electrically isolated where signal noise and crosstalk would otherwise be an issue.
e-corder Pods
e-corder Pods attach to the front panel Pod ports of the e-corder unit. They become an extension of he e-corder system and are fully controlled by software.
|
Accelerometer Pod | a compact signal conditioner providing a continuous AC coupled signal from PCB Piezotronics ICP® accelerometers, microphones, vibration and related sensors requiring a constant current supply |
|
pH & ISE isoPod™ | for pH, ion selective, and ORP electrodes |
|
dO2 isoPod™ | a compact signal conditioner for monitoring polarographic (Clark) dissolved oxygen electrodes |
|
Bridge isoPod™ | full bridge amplifier providing DC or AC excitation |
|
Nitric Oxide isoPod™ | a compact, low noise, signal conditioner for monitoring polarographic nitric oxide electrodes |
|
Biosensor isoPod™ | for amperometric electrodes and sensors |
|
Conductivity isoPod™ | this isoPod is suitable for continuous monitoring of solution conductivity with a two electrode conductivity probe |
|
Thermocouple isoPod™ | an electrically isolated amplifier that is suitable for connection to most types of thermocouple probe |
USB Pods
USB Pods attach directly to a computer USB port or to a USB hub.
|
pH/ISE isoPod™ with USB | for pH, ion selective, and ORP electrodes |
|
dO2 isoPod™ with USB | a compact signal conditioner for monitoring polarographic (Clark) dissolved oxygen electrodes |
|
Nitric Oxide isoPod™ with USB | a compact, low noise, signal conditioner for monitoring polarographic nitric oxide electrodes |
|
Biosensor isoPod™ with USB | for amperometric electrodes and sensors |
|
Thermocouple isoPod™ with USB | an electrically isolated amplifier that is suitable for connection to most types of thermocouple probe |
|
Conductivity isoPod™ with USB | this isoPod is suitable for continuous monitoring of solution conductivity with a two electrode conductivity probe |