pH/ISE isoPodô with USB
A compact signal conditioner for use with pH, ion selective, and oxidation/reduction potentiometric (ORP) electrodes. Can alo be used as a high imopedance voltmeter/electrometer between ±2 V.
Electrical isolation ensures that readings are not influenced by nearby current sources such as polarographic oxygen electrodes, or voltammetric electrodes.
Connects directly to computer USB port, or via a USB hub, and appears as a virtual serial port (COM3, COM4, etc) and uses a serial protocol. Compatible with LabVIEW, HyperTerminal, etc. You can also use eDAQ Pod-Vu software to log and graph signals directly to a Windows XP or later computer.
This isoPod requires a computer with a virtual COM port (VCP) driver from FTDI installed.
- Input Socket: BNC
- Ranges: 2, 20, 200 µS, 2, 20, 200 mS
- Input Impedance: > 1013 ohm
- Ranges: ±2 V, 0 – 14 pH
- Resolution: < 0.1 mV, < 0.001 pH
- Isolation: > 250 Vrms
- Size: 108 x 58 x 35 mm; 200 g