Nitric Oxide isoPodô with USB
A compact, low noise, signal conditioner for monitoring polarographic nitric oxide electrodes.
Electrical isolation minimizes interference with nearby pH, conductivity, ISE and similar sensors used in multi–parametric studies.
Connects directly to computer USB port, or via a USB hub, and appears as a virtual serial port (COM3, COM4, etc) and uses a serial protocol. Compatible with LabVIEW, HyperTerminal, etc. You can also use eDAQ Pod-Vu software to log and graph signals directly to a Windows XP or later computer.
This isoPod requires a computer with a virtual COM port (VCP) driver from FTDI installed.
- Ranges (and resolution):
2 nA (625 aA),
20 nA (6.25 fA),
200 nA (62.5 fA),
2 µA (625 fA)
- Zero offset: ±2 µA
- Polarization: +500 to +1000 mV
- Isolation: > 250 Vrms