Conductivity isoPod™ with USB
This isoPod is suitable for continuous monitoring of solution conductivity with a two electrode conductivity probe.
Connects directly to computer USB port, or via a USB hub, and appears as a virtual serial port (COM3, COM4, etc) and uses a serial protocol. Compatible with LabVIEW, HyperTerminal, etc. You can also use eDAQ Pod-Vu software to log and graph signals directly to a Windows XP or later computer.
This isoPod requires a computer with a virtual COM port (VCP) driver from FTDI installed.
- Input Socket: BNC
- Ranges: 2, 20, 200 µS, 2, 20, 200 mS
- AC waveform: Square pulse, 20 or 200 mV p-p
- AC frequency: 0.5, 1.0 or 10 kHz
- Isolation: > 250 Vrms
EPU357_Conductivity_USB_isoPod (210 KB PDF)
ET902 Conductivity Probe, k=1
ET903 Conductivity Probe, k=10