HV Sequencer |
ER230 HV Sequencer ( click image to enlarge )
This sequencer provides two independently controllable high voltage channels suitable for microchip electrophoresis, or electrokinetic chromatography. It can also be used a voltage source for micro reactors and mixers based on EOF pumping.
A second unit can be piggybacked on the first giving up to four high voltage channels operating on the one clock (ie all pulses are accurately synchronised).
Multiple units (or pairs of units) can be operated as virtual RS232 devices using a serial protocol over a USB connection and compatible software such as LabVIEW, WinWedge, or HyperTerminal.
Specifications
- High voltage outputs: 2, SHV connectors
- Meter inputs: 2, SHV connectors
- Safety interloack: contact closure, BNC connector
- Maximum voltage: ±3 kV per channel (±5 kV on special order)
- Maximum current: 700 µA per channel
- Output modes: OC, open circuit
SC, short circuit to ground (current meter)
HiZ, high impedance voltmeter
SetV, sets voltage (current and voltage reported) - Meter modes: OC, open circuit
SC, short circuit to ground (current meter)
HiZ, high impedance voltmeter
 |
 |
 |
|
More Information
C4D Application Notes (registration required - register now) |
|
 |
|
 |
