Difference between revisions of "C4Dマイクロチップ電気泳動のアニオン検出"
From eDAQ Wiki
(→Data Analysis and Limit of Detection) |
(→データの分析と検出限界) |
||
Line 29: | Line 29: | ||
== '''データの分析と検出限界'''== | == '''データの分析と検出限界'''== | ||
− | 図 2 は 100 μM | + | 図 2 は 100 μM のCl<sup>-</sup>, NO<sub>3</sub><sup>-</sup> 及び HSO<sub>4</sub><sup>-</sup> 水溶液のエレクトロフェログラムを示したものです。これらアニオンの検出限界を計るために、濃度が 10 μM で同じ組成の水溶液を分析しました。図 3はそのエレクトロフェログラムです。 |
Using the definition of limit of detection as equal to three times the standard deviation of signal (during four seconds before the first peak), the limit of detection is 3.7 μM for Cl<sup>-</sup> and NO<sub>3</sub><sup>-</sup>, and 1.3 μM for HSO<sub>4</sub><sup>-</sup>. | Using the definition of limit of detection as equal to three times the standard deviation of signal (during four seconds before the first peak), the limit of detection is 3.7 μM for Cl<sup>-</sup> and NO<sub>3</sub><sup>-</sup>, and 1.3 μM for HSO<sub>4</sub><sup>-</sup>. |
Revision as of 12:06, 28 February 2014
非接触電導度検出器を用いてマイクロチップ電気泳動によって三種類の無機アニオンの検出に eDAQ C4D システムが使われています。
はじめに
三種類の無機陰イオン Cl-, NO3- 、及び HSO4- をマイクロチップ電気泳動法 (MCE) を使って分離し、 eDAQ C4D システムで検出します。
必要な装置と試薬
- ER255 または ER455 マイクロチップ電気泳動システム、システムの構成 :
- バックグランド電解液 (BGE) = 70 mM TRIS/CHES with 1ppm HDMB, where TRIS is Tris(hydroxymethyl)aminomethane, CHES is 2-(Cyclohexylamino)ethanesulfonic acid, and HDMB is hexadimethrine bromide
- サンプル = 100 μM and 10 μM Cl-, NO3- and HSO4- の水溶液
- 高電圧シーケンサーの設定条件:
Time (s) | Step | sample | BGE | waster | outlet |
---|---|---|---|---|---|
0-20 | loading | -1000V | -700V | 0V | -1000V |
20-60 | separation | -750V | -1000 V | -750V | 0V |
データの分析と検出限界
図 2 は 100 μM のCl-, NO3- 及び HSO4- 水溶液のエレクトロフェログラムを示したものです。これらアニオンの検出限界を計るために、濃度が 10 μM で同じ組成の水溶液を分析しました。図 3はそのエレクトロフェログラムです。
Using the definition of limit of detection as equal to three times the standard deviation of signal (during four seconds before the first peak), the limit of detection is 3.7 μM for Cl- and NO3-, and 1.3 μM for HSO4-.