EPU452 Manual
From eDAQ Wiki
Revision as of 16:52, 29 July 2015 by PaulDuckworth (Talk | contribs) (Created page with "This Quad MF isoPod, Figure 1, is a four–channel, miniature amplifier that connects to a Windows XP or later computer via a USB port or hub. Each of its four, separately ele...")
This Quad MF isoPod, Figure 1, is a four–channel, miniature amplifier that connects to a Windows XP or later computer via a USB port or hub. Each of its four, separately electrically isolated channels can be configured as:
- mV, a general purpose high impedance millivolt monitor;
- pH, a high imedance pH meter mode. Also suitable for ion selective and oxidation/reduction potentiometric (ORP) electrodes. One ot two point Nernstian calibration is provided;
- dO2 for Clark–style polarographic oxygen electrodes. One or two point calibration is provided;
- biosensor, for amperometric sensors, incuding enzymic peroxide sensors. One or two point calibration is provided;
- conductivity probes,
- thermistor, precalibrated for 30 kohm thermistor temperature probes.
- RTD, precalibrated for 1000 ohm platinum RTD temperature probes.
