Difference between revisions of "ET125ヘッドステージを用いたC4Dイオンクロマトグラフィー"
From eDAQ Wiki
Line 5: | Line 5: | ||
== '''はじめに''' == | == '''はじめに''' == | ||
− | + | アプリケーションノート C4D004 では、eDAQ C4D システムを PrinCE-C 600 キャピラリー電気泳動 (CE) に接続し、塩化アセチルコリン (AChCl) の分析例を紹介します。 CE 装置は陰イオン測定のモードに、C4D システムも Cl<sup>-</sup> 陰イオンの分析用に設定します。 | |
== Conditions == | == Conditions == |
Revision as of 13:04, 21 February 2014
eDAQ C4D システムと PrinCE-C 600 キャピラリー電気泳動を使ったアセチルコリンの分析
はじめに
アプリケーションノート C4D004 では、eDAQ C4D システムを PrinCE-C 600 キャピラリー電気泳動 (CE) に接続し、塩化アセチルコリン (AChCl) の分析例を紹介します。 CE 装置は陰イオン測定のモードに、C4D システムも Cl- 陰イオンの分析用に設定します。
Conditions
- Analyte: Acetylcholine chloride (AChCl) dissolved in water, analysed at the concentrations 10 mM, 50 mM, 100 mM, 500 mM and 1000 mM
- Buffer:
- MES/Arg/CTAB with pH 5.7, where MES is 2-(N-morpholino)ethanesulfonic acid, Arg is L(+)-Arginine, and CTAB is hexadecyltrimethylammonium bromide
- Instrument:
- separation voltage = 30 kV
- recorded separation current = 11 – 12 µA
- Capillary:
- outer diameter = 360 µm
- internal diameter = 25 µm
- length = 56 cm
- length to detector = 42 cm
- Injection: pressure 300 mbar for 10 seconds
- C4D settings
- frequency = 500 kHz
- amplitude = 100 A
- headstage gain OFF
- Data recording:
- lowpass filter = 1 Hz
- range = 50 mV
- sampling rate = 100 data points per second
Data Analysis
Figure 1 shows the AChCl peaks at the different concentrations. Figure 2 shows how the software can automatically produce a calibration curve by plotting the peak areas versus known concentrations of analyte.