Difference between revisions of "Ion Chromatographs with PowerChrom"
(Created page with "''The PowerChrom or e-corder can be connected to ion chromatography (IC) instruments. The C4D Amp can be added as a contactless conductivity detector.'' == Introduction == Io...") |
|||
| Line 1: | Line 1: | ||
''The PowerChrom or e-corder can be connected to ion chromatography (IC) instruments. The C4D Amp can be added as a contactless conductivity detector.'' | ''The PowerChrom or e-corder can be connected to ion chromatography (IC) instruments. The C4D Amp can be added as a contactless conductivity detector.'' | ||
| − | == Introduction == | + | === Introduction === |
Ion chromatographs that have an analog output can be connected to either the PowerChrom or e-corder. The PowerChrom software is then used to record and analyse the data. | Ion chromatographs that have an analog output can be connected to either the PowerChrom or e-corder. The PowerChrom software is then used to record and analyse the data. | ||
| Line 8: | Line 8: | ||
Add the eDAQ C4D Amp and you can detect your analytes with contactless conductivity detection. | Add the eDAQ C4D Amp and you can detect your analytes with contactless conductivity detection. | ||
| − | == Ion Chromatography with C4D Detection == | + | === Ion Chromatography with C4D Detection === |
Figure 3 shows the e-corder and EA120 C4D Amp connected to the Metrohm 792 Basic IC instrument. | Figure 3 shows the e-corder and EA120 C4D Amp connected to the Metrohm 792 Basic IC instrument. | ||
| Line 14: | Line 14: | ||
<gallery> | <gallery> | ||
| − | File:Figure 1a. The ER280 PowerChrom connected to the Metrohm 690 IC..jpg|Figure 1a. The ER280 PowerChrom connected to the Metrohm 690 IC | + | File:Figure 1a. The ER280 PowerChrom connected to the Metrohm 690 IC..jpg|300px|thumb|Figure 1a. The ER280 PowerChrom connected to the Metrohm 690 IC |
File:Figure 1b. The analog output of the IC instrument and banana plugs to bare wires cable..jpg|Figure 1b. The analog output of the IC instrument and banana plugs to bare wires cable. | File:Figure 1b. The analog output of the IC instrument and banana plugs to bare wires cable..jpg|Figure 1b. The analog output of the IC instrument and banana plugs to bare wires cable. | ||
File:Figure 2. The e-corder is connected to the Dionex DX-100 ion chromatograph using a banana plugs to BNC cable..jpg|Figure 2. The e-corder is connected to the Dionex DX-100 ion chromatograph using a banana plugs to BNC cable. | File:Figure 2. The e-corder is connected to the Dionex DX-100 ion chromatograph using a banana plugs to BNC cable..jpg|Figure 2. The e-corder is connected to the Dionex DX-100 ion chromatograph using a banana plugs to BNC cable. | ||
File:Figure 3. Metrohm 792 Basic IC with eDAQ C4D.jpg|Figure 3. Metrohm 792 Basic IC with eDAQ C4D | File:Figure 3. Metrohm 792 Basic IC with eDAQ C4D.jpg|Figure 3. Metrohm 792 Basic IC with eDAQ C4D | ||
</gallery> | </gallery> | ||
Revision as of 00:32, 9 July 2013
The PowerChrom or e-corder can be connected to ion chromatography (IC) instruments. The C4D Amp can be added as a contactless conductivity detector.
Introduction
Ion chromatographs that have an analog output can be connected to either the PowerChrom or e-corder. The PowerChrom software is then used to record and analyse the data.
The ion chromatograph’s “Inject” port can also be connected to the PowerChrom or e-corder, to trigger the start of recording.
Add the eDAQ C4D Amp and you can detect your analytes with contactless conductivity detection.
Ion Chromatography with C4D Detection
Figure 3 shows the e-corder and EA120 C4D Amp connected to the Metrohm 792 Basic IC instrument.
Conductivity detection can be used for virtually all charged species: inorganic anions and cations, as well as organic ions, such as carboxylic acids, amines, amino acids, peptides, proteins, DNA fragments, antibiotics and many other pharmaceutical compounds.
300px|thumb|Figure 1a. The ER280 PowerChrom connected to the Metrohm 690 IC
Figure 1b. The analog output of the IC instrument and banana plugs to bare wires cable.
Figure 2. The e-corder is connected to the Dionex DX-100 ion chromatograph using a banana plugs to BNC cable.
Figure 3. Metrohm 792 Basic IC with eDAQ C4D
