Main Page

From eDAQ Wiki
Revision as of 20:26, 30 May 2013 by Oliver (Talk | contribs) (Electrochemistry Application Notes)

Jump to: navigation, search

WeDAQ, is a wiki created for discussion about eDAQ products and their uses, including helpful hints, technical notes, and application notes for teaching and research.

If you need help creating or editing content go to the Help page

Helpful Tips

Cleaning and Polishing Voltammetric Electrodes

Cyclic Voltammetry: Hints and Tips

Tethered Membranes

Application Notes

Electrochemistry Application Notes

ELE001 Plotting the IV Curve of a Solar Cell in EChem Software

ELE002 Analysis of Antioxidants using Cyclic Voltammetry

ELE003 Connecting 3rd Party Potentiostats to the e-corder

ELE004 Software for Electrochemistry Techniques

Click here for more application notes. You will have to register on the web site but this is FREE.

Technical Notes

Using ecorder over internet

Signal Sources and Amplifiers

How to Choose a Potentiostat

Screencast Training Videos

Electrochemistry with EChem and Chart

Echem-potentiostat-maintenance.jpg


Check the Performance of the Potentiostat with Potentiostat Maintenance Check


Setting-up-EChem-software-for-Cyclic-Voltammetry.jpg


How to Setup the EChem Software for Cyclic Voltammetry


Chronoamperometry.jpg


How to Setup the Chart Software for Chronoamperometry


Galvanostat mode3.jpg


Using the eDAQ Potentiostat in Galvanostat Mode


Echem drawing baseline.jpg


How to Draw a Baseline and Integrate a Peak in the EChem Software


Overlay-in-echem.jpg


Overlaying Voltammograms in EChem Software


Echem-computed-funtions.jpg


Computed Functions in EChem for Data Calculations and Smoothing


EChem-copy-and-paste.jpg


How to Copy and Paste EChem Data to Other Software


Electrochemical Impedance Spectroscopy (EIS) with the Z100

Z100 Loopback Test

Z100 Blank Test

ZMAN Basic Overview of ZMAN software

ZMAN1 Open a Data File

ZMAN2 Preview and Edit Data

ZMAN3 Kramers-Kronig Consistency

ZMAN4 Modeling

ZMAN5 Automatic Model Search

ZMAN6 Circular Fitting


Chart Software

Setting up the Software

Digital Outputs and the Event Manager

Stimulator Waveform Generator

Timed and Multiple Add to Data Pad

Converting Units

Units Conversion

Multipoint Calibration

pH Calibration

Analysing Data

Data Pad

Marker to Calculate Height of a Peak

Spectrum FFT

Baseline Adjustment Extension

Saving, Importing and Exporting Data

Copy and Paste Chart Data to Other Software

Chart Save As

Automatically Exporting Chart data into Excel

Open PowerChrom Data in the Chart Software


Chromatography with PowerChrom

Basic Settings

A Simple Analysis

Manually Integrate a Peak

Method and Calibration Tables

Overlaying Chromatographs

Copy and Paste Data to Other Softwares

Open a Chart Data File in PowerChrom Software


C4D for Capillary Electrophoresis and Microchip Electrophoresis

A Procedure for C4D Analysis in PowerChrom Software

A Procedure for C4D Analysis in Chart Software

The C4D Profiler in PowerChrom Software to Optimise C4D Settings

Using the C4D Detector Software to Control the ER125 C4D Detector

HV Sequencer to Trigger PowerChrom Software in Microchip Electrophoresis

A Procedure for Microchip Electrophoresis with C4D


SDx Tethered Membranes

How to assemble a tethaPlate cartridge

Making a tethered membrane


FIA Flow Injection Analysis

Integrate a Peak and Calibration Curve

Print a Report

Pod-Vu for isoPods

Serial Port Monitor