https://www.edaq.com/w/index.php?title=Recording_from_Figaro_Gas_Sensors&feed=atom&action=history
Recording from Figaro Gas Sensors - Revision history
2024-03-29T06:34:25Z
Revision history for this page on the wiki
MediaWiki 1.25.1
https://www.edaq.com/w/index.php?title=Recording_from_Figaro_Gas_Sensors&diff=1319&oldid=prev
Oliver: /* Experimental Setup */
2013-07-11T07:57:10Z
<p><span dir="auto"><span class="autocomment">Experimental Setup</span></span></p>
<table class='diff diff-contentalign-left'>
<col class='diff-marker' />
<col class='diff-content' />
<col class='diff-marker' />
<col class='diff-content' />
<tr style='vertical-align: top;'>
<td colspan='2' style="background-color: white; color:black; text-align: center;">← Older revision</td>
<td colspan='2' style="background-color: white; color:black; text-align: center;">Revision as of 07:57, 11 July 2013</td>
</tr><tr><td colspan="2" class="diff-lineno" id="L17" >Line 17:</td>
<td colspan="2" class="diff-lineno">Line 17:</td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>The sensor requires two voltage inputs, which are supplied by the e-corder: the heater voltage and the circuit voltage.  The heater voltage is applied to the integrated heater in order to maintain the sensing element at a specific temperature which is optimal for sensing.  Circuit voltage is applied to allow measurement of voltage across a load resistor which is connected in series with the sensor.</div></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>The sensor requires two voltage inputs, which are supplied by the e-corder: the heater voltage and the circuit voltage.  The heater voltage is applied to the integrated heater in order to maintain the sensing element at a specific temperature which is optimal for sensing.  Circuit voltage is applied to allow measurement of voltage across a load resistor which is connected in series with the sensor.</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'>−</td><td style="color:black; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>The Arithmetic calculation function in the Chart software is used convert measured voltage to sensor resistance. For example, for the TGS 2620 ethanol sensor, Equation 1 is used.</div></td><td class='diff-marker'>+</td><td style="color:black; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>The Arithmetic calculation function in the Chart software is used convert measured voltage to sensor resistance. For example, for the TGS 2620 ethanol sensor, Equation 1 is used<ins class="diffchange diffchange-inline">. When the ambient temperature and humidity is taken into account, the Sensor resistance can be converted to the concentration of the gas</ins>.</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>         <math>R_s = \tfrac{V_C - V_{RL}}{V_{RL}} \times R_L</math>          Equation 1.</div></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>         <math>R_s = \tfrac{V_C - V_{RL}}{V_{RL}} \times R_L</math>          Equation 1.</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>where sensor resistance (R<sub>s</sub>), circuit voltage (V<sub>C</sub>), measured voltage (V<sub>RL</sub>) and load resistor (R<sub>L</sub>)</div></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>where sensor resistance (R<sub>s</sub>), circuit voltage (V<sub>C</sub>), measured voltage (V<sub>RL</sub>) and load resistor (R<sub>L</sub>)</div></td></tr>
<tr><td class='diff-marker'>−</td><td style="color:black; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div><del style="font-weight: bold; text-decoration: none;"></del></div></td><td colspan="2"> </td></tr>
<tr><td class='diff-marker'>−</td><td style="color:black; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div><del style="font-weight: bold; text-decoration: none;">When the ambient temperature and humidity is taken into account, the Sensor resistance can be converted to the concentration of the gas.</del></div></td><td colspan="2"> </td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>[[File:Figure 2. The ethanol in the flask is heated by the hotplate. The ethanol vapour travels through the tubing to the Figaro TGS 2620 sensor.jpg|600px|thumb|left|Figure 2. The ethanol in the flask is heated by the hotplate. The ethanol vapour travels through the tubing to the Figaro TGS 2620 sensor]]</div></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>[[File:Figure 2. The ethanol in the flask is heated by the hotplate. The ethanol vapour travels through the tubing to the Figaro TGS 2620 sensor.jpg|600px|thumb|left|Figure 2. The ethanol in the flask is heated by the hotplate. The ethanol vapour travels through the tubing to the Figaro TGS 2620 sensor]]</div></td></tr>
</table>
Oliver
https://www.edaq.com/w/index.php?title=Recording_from_Figaro_Gas_Sensors&diff=1318&oldid=prev
Oliver: /* Experimental Setup */
2013-07-11T07:55:49Z
<p><span dir="auto"><span class="autocomment">Experimental Setup</span></span></p>
<table class='diff diff-contentalign-left'>
<col class='diff-marker' />
<col class='diff-content' />
<col class='diff-marker' />
<col class='diff-content' />
<tr style='vertical-align: top;'>
<td colspan='2' style="background-color: white; color:black; text-align: center;">← Older revision</td>
<td colspan='2' style="background-color: white; color:black; text-align: center;">Revision as of 07:55, 11 July 2013</td>
</tr><tr><td colspan="2" class="diff-lineno" id="L15" >Line 15:</td>
<td colspan="2" class="diff-lineno">Line 15:</td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>The sensing element inside the Figaro sensor is comprised of a metal oxide semiconductor layer formed on an alumina substrate of a sensing chip together with an integrated heater. In the presence of a detectable gas, the sensor's conductivity increases depending on the gas concentration in the air.  The gas sensor cable from eDAQ can convert the change in conductivity to an output signal which corresponds to the gas concentration. This signal is record by the e-corder.</div></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>The sensing element inside the Figaro sensor is comprised of a metal oxide semiconductor layer formed on an alumina substrate of a sensing chip together with an integrated heater. In the presence of a detectable gas, the sensor's conductivity increases depending on the gas concentration in the air.  The gas sensor cable from eDAQ can convert the change in conductivity to an output signal which corresponds to the gas concentration. This signal is record by the e-corder.</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'>−</td><td style="color:black; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>The sensor requires two voltage inputs, which are supplied by the e-corder: the heater voltage <del class="diffchange diffchange-inline">(V<sub>H</sub>) </del>and the circuit voltage <del class="diffchange diffchange-inline">(V<sub>C</sub>)</del>.  The heater voltage is applied to the integrated heater in order to maintain the sensing element at a specific temperature which is optimal for sensing.  Circuit voltage is applied to allow measurement of voltage <del class="diffchange diffchange-inline">(V<sub>RL</sub>) </del>across a load resistor <del class="diffchange diffchange-inline">(R<sub>L</sub>) </del>which is connected in series with the sensor.</div></td><td class='diff-marker'>+</td><td style="color:black; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>The sensor requires two voltage inputs, which are supplied by the e-corder: the heater voltage and the circuit voltage.  The heater voltage is applied to the integrated heater in order to maintain the sensing element at a specific temperature which is optimal for sensing.  Circuit voltage is applied to allow measurement of voltage across a load resistor which is connected in series with the sensor.</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>The Arithmetic calculation function in the Chart software is used convert measured voltage to sensor resistance. For example, for the TGS 2620 ethanol sensor, Equation 1 is used.</div></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>The Arithmetic calculation function in the Chart software is used convert measured voltage to sensor resistance. For example, for the TGS 2620 ethanol sensor, Equation 1 is used.</div></td></tr>
</table>
Oliver
https://www.edaq.com/w/index.php?title=Recording_from_Figaro_Gas_Sensors&diff=1317&oldid=prev
Oliver at 07:53, 11 July 2013
2013-07-11T07:53:27Z
<p></p>
<table class='diff diff-contentalign-left'>
<col class='diff-marker' />
<col class='diff-content' />
<col class='diff-marker' />
<col class='diff-content' />
<tr style='vertical-align: top;'>
<td colspan='2' style="background-color: white; color:black; text-align: center;">← Older revision</td>
<td colspan='2' style="background-color: white; color:black; text-align: center;">Revision as of 07:53, 11 July 2013</td>
</tr><tr><td colspan="2" class="diff-lineno" id="L12" >Line 12:</td>
<td colspan="2" class="diff-lineno">Line 12:</td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>* A gas sensor from [http://www.figarosensor.com Figaro Engineering]</div></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>* A gas sensor from [http://www.figarosensor.com Figaro Engineering]</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'>−</td><td style="color:black; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>== Setup ==</div></td><td class='diff-marker'>+</td><td style="color:black; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>==<ins class="diffchange diffchange-inline">= Experimental </ins>Setup <ins class="diffchange diffchange-inline">=</ins>==</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>The sensing element inside the Figaro sensor is comprised of a metal oxide semiconductor layer formed on an alumina substrate of a sensing chip together with an integrated heater. In the presence of a detectable gas, the sensor's conductivity increases depending on the gas concentration in the air.  The gas sensor cable from eDAQ can convert the change in conductivity to an output signal which corresponds to the gas concentration. This signal is record by the e-corder.</div></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>The sensing element inside the Figaro sensor is comprised of a metal oxide semiconductor layer formed on an alumina substrate of a sensing chip together with an integrated heater. In the presence of a detectable gas, the sensor's conductivity increases depending on the gas concentration in the air.  The gas sensor cable from eDAQ can convert the change in conductivity to an output signal which corresponds to the gas concentration. This signal is record by the e-corder.</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>The sensor requires two voltage inputs, which are supplied by the e-corder: the heater voltage (V<sub>H</sub>) and the circuit voltage (V<sub>C</sub>).  The heater voltage is applied to the integrated heater in order to maintain the sensing element at a specific temperature which is optimal for sensing.  Circuit voltage is applied to allow measurement of voltage (V<sub>RL</sub>) across a load resistor (R<sub>L</sub>) which is connected in series with the sensor.</div></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>The sensor requires two voltage inputs, which are supplied by the e-corder: the heater voltage (V<sub>H</sub>) and the circuit voltage (V<sub>C</sub>).  The heater voltage is applied to the integrated heater in order to maintain the sensing element at a specific temperature which is optimal for sensing.  Circuit voltage is applied to allow measurement of voltage (V<sub>RL</sub>) across a load resistor (R<sub>L</sub>) which is connected in series with the sensor.</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'>−</td><td style="color:black; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>The Arithmetic calculation function in the Chart software is used convert measured voltage to sensor resistance, <del class="diffchange diffchange-inline">using </del>Equation 1.</div></td><td class='diff-marker'>+</td><td style="color:black; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>The Arithmetic calculation function in the Chart software is used convert measured voltage to sensor resistance<ins class="diffchange diffchange-inline">. For example, for the TGS 2620 ethanol sensor</ins>, Equation 1 <ins class="diffchange diffchange-inline">is used</ins>.</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>         <math>R_s = \tfrac{V_C - V_{RL}}{V_{RL}} \times R_L</math>          Equation 1.</div></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>         <math>R_s = \tfrac{V_C - V_{RL}}{V_{RL}} \times R_L</math>          Equation 1.</div></td></tr>
</table>
Oliver
https://www.edaq.com/w/index.php?title=Recording_from_Figaro_Gas_Sensors&diff=1316&oldid=prev
Oliver: /* Setup */
2013-07-11T07:49:17Z
<p><span dir="auto"><span class="autocomment">Setup</span></span></p>
<table class='diff diff-contentalign-left'>
<col class='diff-marker' />
<col class='diff-content' />
<col class='diff-marker' />
<col class='diff-content' />
<tr style='vertical-align: top;'>
<td colspan='2' style="background-color: white; color:black; text-align: center;">← Older revision</td>
<td colspan='2' style="background-color: white; color:black; text-align: center;">Revision as of 07:49, 11 July 2013</td>
</tr><tr><td colspan="2" class="diff-lineno" id="L17" >Line 17:</td>
<td colspan="2" class="diff-lineno">Line 17:</td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>The sensor requires two voltage inputs, which are supplied by the e-corder: the heater voltage (V<sub>H</sub>) and the circuit voltage (V<sub>C</sub>).  The heater voltage is applied to the integrated heater in order to maintain the sensing element at a specific temperature which is optimal for sensing.  Circuit voltage is applied to allow measurement of voltage (V<sub>RL</sub>) across a load resistor (R<sub>L</sub>) which is connected in series with the sensor.</div></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>The sensor requires two voltage inputs, which are supplied by the e-corder: the heater voltage (V<sub>H</sub>) and the circuit voltage (V<sub>C</sub>).  The heater voltage is applied to the integrated heater in order to maintain the sensing element at a specific temperature which is optimal for sensing.  Circuit voltage is applied to allow measurement of voltage (V<sub>RL</sub>) across a load resistor (R<sub>L</sub>) which is connected in series with the sensor.</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'>−</td><td style="color:black; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>The Arithmetic calculation function in the Chart software is used convert measured voltage <del class="diffchange diffchange-inline">(V<sub>RL</sub>) </del>to sensor resistance <del class="diffchange diffchange-inline">(R<sub>s</sub>)</del>, using Equation 1.</div></td><td class='diff-marker'>+</td><td style="color:black; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>The Arithmetic calculation function in the Chart software is used convert measured voltage to sensor resistance, using Equation 1.</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>         <math>R_s = \tfrac{V_C - V_{RL}}{V_{RL}} \times R_L</math>          Equation 1.</div></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>         <math>R_s = \tfrac{V_C - V_{RL}}{V_{RL}} \times R_L</math>          Equation 1.</div></td></tr>
</table>
Oliver
https://www.edaq.com/w/index.php?title=Recording_from_Figaro_Gas_Sensors&diff=1315&oldid=prev
Oliver: /* Setup */
2013-07-11T07:48:47Z
<p><span dir="auto"><span class="autocomment">Setup</span></span></p>
<table class='diff diff-contentalign-left'>
<col class='diff-marker' />
<col class='diff-content' />
<col class='diff-marker' />
<col class='diff-content' />
<tr style='vertical-align: top;'>
<td colspan='2' style="background-color: white; color:black; text-align: center;">← Older revision</td>
<td colspan='2' style="background-color: white; color:black; text-align: center;">Revision as of 07:48, 11 July 2013</td>
</tr><tr><td colspan="2" class="diff-lineno" id="L22" >Line 22:</td>
<td colspan="2" class="diff-lineno">Line 22:</td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>where sensor resistance (R<sub>s</sub>), circuit voltage (V<sub>C</sub>), measured voltage (V<sub>RL</sub>) and load resistor (R<sub>L</sub>)</div></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>where sensor resistance (R<sub>s</sub>), circuit voltage (V<sub>C</sub>), measured voltage (V<sub>RL</sub>) and load resistor (R<sub>L</sub>)</div></td></tr>
<tr><td class='diff-marker'>−</td><td style="color:black; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div><del style="font-weight: bold; text-decoration: none;"></del></div></td><td colspan="2"> </td></tr>
<tr><td class='diff-marker'>−</td><td style="color:black; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div><del style="font-weight: bold; text-decoration: none;">where sensor resistance <math>(R_s)<math>, circuit voltage (V<sub>C</sub>), measured voltage (V<sub>RL</sub>) and load resistor (R<sub>L</sub>)</del></div></td><td colspan="2"> </td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>When the ambient temperature and humidity is taken into account, the Sensor resistance can be converted to the concentration of the gas.</div></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>When the ambient temperature and humidity is taken into account, the Sensor resistance can be converted to the concentration of the gas.</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>[[File:Figure 2. The ethanol in the flask is heated by the hotplate. The ethanol vapour travels through the tubing to the Figaro TGS 2620 sensor.jpg|600px|thumb|left|Figure 2. The ethanol in the flask is heated by the hotplate. The ethanol vapour travels through the tubing to the Figaro TGS 2620 sensor]]</div></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>[[File:Figure 2. The ethanol in the flask is heated by the hotplate. The ethanol vapour travels through the tubing to the Figaro TGS 2620 sensor.jpg|600px|thumb|left|Figure 2. The ethanol in the flask is heated by the hotplate. The ethanol vapour travels through the tubing to the Figaro TGS 2620 sensor]]</div></td></tr>
</table>
Oliver
https://www.edaq.com/w/index.php?title=Recording_from_Figaro_Gas_Sensors&diff=1314&oldid=prev
Oliver: /* Setup */
2013-07-11T07:48:25Z
<p><span dir="auto"><span class="autocomment">Setup</span></span></p>
<table class='diff diff-contentalign-left'>
<col class='diff-marker' />
<col class='diff-content' />
<col class='diff-marker' />
<col class='diff-content' />
<tr style='vertical-align: top;'>
<td colspan='2' style="background-color: white; color:black; text-align: center;">← Older revision</td>
<td colspan='2' style="background-color: white; color:black; text-align: center;">Revision as of 07:48, 11 July 2013</td>
</tr><tr><td colspan="2" class="diff-lineno" id="L23" >Line 23:</td>
<td colspan="2" class="diff-lineno">Line 23:</td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>where sensor resistance (R<sub>s</sub>), circuit voltage (V<sub>C</sub>), measured voltage (V<sub>RL</sub>) and load resistor (R<sub>L</sub>)</div></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>where sensor resistance (R<sub>s</sub>), circuit voltage (V<sub>C</sub>), measured voltage (V<sub>RL</sub>) and load resistor (R<sub>L</sub>)</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'>−</td><td style="color:black; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div><del class="diffchange diffchange-inline"><math></del>where sensor resistance <del class="diffchange diffchange-inline">(R</del><<del class="diffchange diffchange-inline">sub</del>><del class="diffchange diffchange-inline">s</del><<del class="diffchange diffchange-inline">/sub</del>><del class="diffchange diffchange-inline">)</del>, circuit voltage (V<sub>C</sub>), measured voltage (V<sub>RL</sub>) and load resistor (R<sub>L</sub>)<del class="diffchange diffchange-inline"></math></del></div></td><td class='diff-marker'>+</td><td style="color:black; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>where sensor resistance <<ins class="diffchange diffchange-inline">math</ins>><ins class="diffchange diffchange-inline">(R_s)</ins><<ins class="diffchange diffchange-inline">math</ins>>, circuit voltage (V<sub>C</sub>), measured voltage (V<sub>RL</sub>) and load resistor (R<sub>L</sub>)</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>When the ambient temperature and humidity is taken into account, the Sensor resistance can be converted to the concentration of the gas.</div></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>When the ambient temperature and humidity is taken into account, the Sensor resistance can be converted to the concentration of the gas.</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>[[File:Figure 2. The ethanol in the flask is heated by the hotplate. The ethanol vapour travels through the tubing to the Figaro TGS 2620 sensor.jpg|600px|thumb|left|Figure 2. The ethanol in the flask is heated by the hotplate. The ethanol vapour travels through the tubing to the Figaro TGS 2620 sensor]]</div></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>[[File:Figure 2. The ethanol in the flask is heated by the hotplate. The ethanol vapour travels through the tubing to the Figaro TGS 2620 sensor.jpg|600px|thumb|left|Figure 2. The ethanol in the flask is heated by the hotplate. The ethanol vapour travels through the tubing to the Figaro TGS 2620 sensor]]</div></td></tr>
</table>
Oliver
https://www.edaq.com/w/index.php?title=Recording_from_Figaro_Gas_Sensors&diff=1313&oldid=prev
Oliver: /* Setup */
2013-07-11T07:47:08Z
<p><span dir="auto"><span class="autocomment">Setup</span></span></p>
<table class='diff diff-contentalign-left'>
<col class='diff-marker' />
<col class='diff-content' />
<col class='diff-marker' />
<col class='diff-content' />
<tr style='vertical-align: top;'>
<td colspan='2' style="background-color: white; color:black; text-align: center;">← Older revision</td>
<td colspan='2' style="background-color: white; color:black; text-align: center;">Revision as of 07:47, 11 July 2013</td>
</tr><tr><td colspan="2" class="diff-lineno" id="L22" >Line 22:</td>
<td colspan="2" class="diff-lineno">Line 22:</td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>where sensor resistance (R<sub>s</sub>), circuit voltage (V<sub>C</sub>), measured voltage (V<sub>RL</sub>) and load resistor (R<sub>L</sub>)</div></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>where sensor resistance (R<sub>s</sub>), circuit voltage (V<sub>C</sub>), measured voltage (V<sub>RL</sub>) and load resistor (R<sub>L</sub>)</div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color:black; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;"></ins></div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color:black; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;"><math>where sensor resistance (R<sub>s</sub>), circuit voltage (V<sub>C</sub>), measured voltage (V<sub>RL</sub>) and load resistor (R<sub>L</sub>)</math></ins></div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>When the ambient temperature and humidity is taken into account, the Sensor resistance can be converted to the concentration of the gas.</div></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>When the ambient temperature and humidity is taken into account, the Sensor resistance can be converted to the concentration of the gas.</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>[[File:Figure 2. The ethanol in the flask is heated by the hotplate. The ethanol vapour travels through the tubing to the Figaro TGS 2620 sensor.jpg|600px|thumb|left|Figure 2. The ethanol in the flask is heated by the hotplate. The ethanol vapour travels through the tubing to the Figaro TGS 2620 sensor]]</div></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>[[File:Figure 2. The ethanol in the flask is heated by the hotplate. The ethanol vapour travels through the tubing to the Figaro TGS 2620 sensor.jpg|600px|thumb|left|Figure 2. The ethanol in the flask is heated by the hotplate. The ethanol vapour travels through the tubing to the Figaro TGS 2620 sensor]]</div></td></tr>
</table>
Oliver
https://www.edaq.com/w/index.php?title=Recording_from_Figaro_Gas_Sensors&diff=1312&oldid=prev
Oliver: /* Setup */
2013-07-11T07:46:25Z
<p><span dir="auto"><span class="autocomment">Setup</span></span></p>
<table class='diff diff-contentalign-left'>
<col class='diff-marker' />
<col class='diff-content' />
<col class='diff-marker' />
<col class='diff-content' />
<tr style='vertical-align: top;'>
<td colspan='2' style="background-color: white; color:black; text-align: center;">← Older revision</td>
<td colspan='2' style="background-color: white; color:black; text-align: center;">Revision as of 07:46, 11 July 2013</td>
</tr><tr><td colspan="2" class="diff-lineno" id="L19" >Line 19:</td>
<td colspan="2" class="diff-lineno">Line 19:</td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>The Arithmetic calculation function in the Chart software is used convert measured voltage (V<sub>RL</sub>) to sensor resistance (R<sub>s</sub>), using Equation 1.</div></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>The Arithmetic calculation function in the Chart software is used convert measured voltage (V<sub>RL</sub>) to sensor resistance (R<sub>s</sub>), using Equation 1.</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'>−</td><td style="color:black; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div><math>R_s = \tfrac{V_C - V_{RL}}{V_{RL}} \times R_L</math> <del class="diffchange diffchange-inline">  </del>Equation 1.</div></td><td class='diff-marker'>+</td><td style="color:black; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins class="diffchange diffchange-inline">        </ins><math>R_s = \tfrac{V_C - V_{RL}}{V_{RL}} \times R_L</math> <ins class="diffchange diffchange-inline">        </ins>Equation 1.</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>where sensor resistance (R<sub>s</sub>), circuit voltage (V<sub>C</sub>), measured voltage (V<sub>RL</sub>) and load resistor (R<sub>L</sub>)</div></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>where sensor resistance (R<sub>s</sub>), circuit voltage (V<sub>C</sub>), measured voltage (V<sub>RL</sub>) and load resistor (R<sub>L</sub>)</div></td></tr>
</table>
Oliver
https://www.edaq.com/w/index.php?title=Recording_from_Figaro_Gas_Sensors&diff=1311&oldid=prev
Oliver: /* Setup */
2013-07-11T07:45:14Z
<p><span dir="auto"><span class="autocomment">Setup</span></span></p>
<table class='diff diff-contentalign-left'>
<col class='diff-marker' />
<col class='diff-content' />
<col class='diff-marker' />
<col class='diff-content' />
<tr style='vertical-align: top;'>
<td colspan='2' style="background-color: white; color:black; text-align: center;">← Older revision</td>
<td colspan='2' style="background-color: white; color:black; text-align: center;">Revision as of 07:45, 11 July 2013</td>
</tr><tr><td colspan="2" class="diff-lineno" id="L17" >Line 17:</td>
<td colspan="2" class="diff-lineno">Line 17:</td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>The sensor requires two voltage inputs, which are supplied by the e-corder: the heater voltage (V<sub>H</sub>) and the circuit voltage (V<sub>C</sub>).  The heater voltage is applied to the integrated heater in order to maintain the sensing element at a specific temperature which is optimal for sensing.  Circuit voltage is applied to allow measurement of voltage (V<sub>RL</sub>) across a load resistor (R<sub>L</sub>) which is connected in series with the sensor.</div></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>The sensor requires two voltage inputs, which are supplied by the e-corder: the heater voltage (V<sub>H</sub>) and the circuit voltage (V<sub>C</sub>).  The heater voltage is applied to the integrated heater in order to maintain the sensing element at a specific temperature which is optimal for sensing.  Circuit voltage is applied to allow measurement of voltage (V<sub>RL</sub>) across a load resistor (R<sub>L</sub>) which is connected in series with the sensor.</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'>−</td><td style="color:black; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>The Arithmetic calculation function in the Chart software is used convert measured voltage (V<sub>RL</sub>) to <del class="diffchange diffchange-inline">Sensor </del>resistance (R<sub>s</sub>), using Equation 1.</div></td><td class='diff-marker'>+</td><td style="color:black; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>The Arithmetic calculation function in the Chart software is used convert measured voltage (V<sub>RL</sub>) to <ins class="diffchange diffchange-inline">sensor </ins>resistance (R<sub>s</sub>), using Equation 1.</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'>−</td><td style="color:black; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div><math>R_s = \tfrac{V_C - V_{RL}}{V_{RL}} \times R_L</math></div></td><td class='diff-marker'>+</td><td style="color:black; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><math>R_s = \tfrac{V_C - V_{RL}}{V_{RL}} \times R_L</math> <ins class="diffchange diffchange-inline">  Equation 1.</ins></div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color:black; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div> </div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color:black; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins class="diffchange diffchange-inline">where sensor resistance (R<sub>s</sub>), circuit voltage (V<sub>C</sub>), measured voltage (V<sub>RL</sub>) and load resistor (R<sub>L</sub>)</ins></div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>When the ambient temperature and humidity is taken into account, the Sensor resistance can be converted to the concentration of the gas.</div></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>When the ambient temperature and humidity is taken into account, the Sensor resistance can be converted to the concentration of the gas.</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>[[File:Figure 2. The ethanol in the flask is heated by the hotplate. The ethanol vapour travels through the tubing to the Figaro TGS 2620 sensor.jpg|600px|thumb|left|Figure 2. The ethanol in the flask is heated by the hotplate. The ethanol vapour travels through the tubing to the Figaro TGS 2620 sensor]]</div></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>[[File:Figure 2. The ethanol in the flask is heated by the hotplate. The ethanol vapour travels through the tubing to the Figaro TGS 2620 sensor.jpg|600px|thumb|left|Figure 2. The ethanol in the flask is heated by the hotplate. The ethanol vapour travels through the tubing to the Figaro TGS 2620 sensor]]</div></td></tr>
</table>
Oliver
https://www.edaq.com/w/index.php?title=Recording_from_Figaro_Gas_Sensors&diff=1310&oldid=prev
Oliver: Undo revision 1309 by Oliver (talk)
2013-07-11T07:42:00Z
<p>Undo revision 1309 by <a href="/wiki/Special:Contributions/Oliver" title="Special:Contributions/Oliver">Oliver</a> (<a href="/w/index.php?title=User_talk:Oliver&action=edit&redlink=1" class="new" title="User talk:Oliver (page does not exist)">talk</a>)</p>
<table class='diff diff-contentalign-left'>
<col class='diff-marker' />
<col class='diff-content' />
<col class='diff-marker' />
<col class='diff-content' />
<tr style='vertical-align: top;'>
<td colspan='2' style="background-color: white; color:black; text-align: center;">← Older revision</td>
<td colspan='2' style="background-color: white; color:black; text-align: center;">Revision as of 07:42, 11 July 2013</td>
</tr><tr><td colspan="2" class="diff-lineno" id="L17" >Line 17:</td>
<td colspan="2" class="diff-lineno">Line 17:</td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>The sensor requires two voltage inputs, which are supplied by the e-corder: the heater voltage (V<sub>H</sub>) and the circuit voltage (V<sub>C</sub>).  The heater voltage is applied to the integrated heater in order to maintain the sensing element at a specific temperature which is optimal for sensing.  Circuit voltage is applied to allow measurement of voltage (V<sub>RL</sub>) across a load resistor (R<sub>L</sub>) which is connected in series with the sensor.</div></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div>The sensor requires two voltage inputs, which are supplied by the e-corder: the heater voltage (V<sub>H</sub>) and the circuit voltage (V<sub>C</sub>).  The heater voltage is applied to the integrated heater in order to maintain the sensing element at a specific temperature which is optimal for sensing.  Circuit voltage is applied to allow measurement of voltage (V<sub>RL</sub>) across a load resistor (R<sub>L</sub>) which is connected in series with the sensor.</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'>−</td><td style="color:black; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>The Arithmetic calculation function in the Chart software is used convert measured voltage (<del class="diffchange diffchange-inline">V_RL</del>) to Sensor resistance (R<sub>s</sub>), using Equation 1.</div></td><td class='diff-marker'>+</td><td style="color:black; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>The Arithmetic calculation function in the Chart software is used convert measured voltage (<ins class="diffchange diffchange-inline">V<sub>RL</sub></ins>) to Sensor resistance (R<sub>s</sub>), using Equation 1.</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div><math>R_s = \tfrac{V_C - V_{RL}}{V_{RL}} \times R_L</math></div></td><td class='diff-marker'> </td><td style="background-color: #f9f9f9; color: #333333; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #e6e6e6; vertical-align: top; white-space: pre-wrap;"><div><math>R_s = \tfrac{V_C - V_{RL}}{V_{RL}} \times R_L</math></div></td></tr>
</table>
Oliver