Recording from Figaro Gas Sensors
From eDAQ Wiki
Revision as of 00:46, 9 July 2013 by Oliver (Talk | contribs) (Created page with "[[File:Figure 1. The Chart software gives a continuous live display of the gas concentration.jpg|300px|thumb|right|Figure 1. The Chart software gives a continuous live display...")
The e-corder can be connected to a Figaro sensor to record gas concentration.
Introduction
Figaro Engineering www.figarosensor.com manufacture a range of sensors for measuring different gasses. The e-corder can provide the 5 V required to power the sensor and measure the signal produced. The Chart software is used to calibrate and monitor the signal. The gas concentration is displayed in real time as in Figure 1.
Equipment Required
The following equipment is required:
- Computer installed with Chart software
- e-corder unit
- Gas sensor cable, available from eDAQ
- A gas sensor from Figaro