File list

Jump to: navigation, search

This special page shows all uploaded files.

File list
 
First page
Last page
Date Name Thumbnail Size User Description Versions
12:45, 10 July 2013 Figure 5. Pasting Chart link into Excel.jpg (file) 56 KB Oliver   1
12:45, 10 July 2013 Figure 4. Excel’s “Paste Special” dialog box.jpg (file) 28 KB Oliver   1
12:45, 10 July 2013 Figure 3. Selecting the Data Pad cells to link.jpg (file) 50 KB Oliver   1
12:45, 10 July 2013 Figure 2. Copying the Zoom view as a graphic.jpg (file) 86 KB Oliver   1
12:45, 10 July 2013 Figure 1. A selection of Chart data.jpg (file) 109 KB Oliver   1
22:44, 9 July 2013 Figure 7. A signal viewed with various display settings changed.jpg (file) 41 KB Oliver   1
22:44, 9 July 2013 Figure 6. Noise in a signal (left) can mar the original signal (right), unless filtered out.jpg (file) 28 KB Oliver   1
22:44, 9 July 2013 Figure 5. A signal with various low-pass filter settings.jpg (file) 31 KB Oliver   1
22:44, 9 July 2013 Figure 4. The effects of filtering on a mixed-frequency signal.jpg (file) 53 KB Oliver   1
22:44, 9 July 2013 Figure 3. Aliasing, sampling a 3.5 Hz signal at 4.jpg (file) 73 KB Oliver   1
22:44, 9 July 2013 Figure 2. Undersampling, recording a signal at 20.jpg (file) 39 KB Oliver   1
22:44, 9 July 2013 Figure 1. A summary of data acquisition using an e-corder system.jpg (file) 45 KB Oliver   1
18:30, 9 July 2013 EXP011 The pH Electrode and Potentiometric Titrations ZIP.zip (file) 6.62 MB Oliver   1
18:28, 9 July 2013 EXP009 Heat of Neutralisation ZIP.zip (file) 1.85 MB Oliver   1
18:24, 9 July 2013 EXP006 Fluoride Ion Selective Electrodes ZIP.zip (file) 1.2 MB Oliver   1
18:24, 9 July 2013 EXP004a Measurement of Iron Corrosion Exchange Current ZIP.zip (file) 1.04 MB Oliver   1
18:19, 9 July 2013 EXP002 Cyclic Voltammetry of Ferrocene Carboxylic Acid ZIP.zip (file) 1.85 MB Oliver   1
18:08, 9 July 2013 EXP001 Anodic Stripping Voltammetry ZIP.zip (file) 1.54 MB Oliver   1
18:02, 9 July 2013 EXP011 The pH Electrode and Potentiometric Titrations PDF.pdf (file) 2.19 MB Oliver   1
18:01, 9 July 2013 EXP009 Heat of Neutralisation PDF.pdf (file) 747 KB Oliver   1
18:01, 9 July 2013 EXP006 Fluoride Ion Selective Electrodes PDF.pdf (file) 536 KB Oliver   1
18:01, 9 July 2013 EXP002 Cyclic Voltammetry of Ferrocene Carboxylic Acid PDF.pdf (file) 866 KB Oliver   1
18:01, 9 July 2013 EXP004a Measurement of Iron Corrosion Exchange Current PDF.pdf (file) 406 KB Oliver   1
16:52, 9 July 2013 Table 1. delta f ranges and suitable Scale Factors.jpg (file) 54 KB Oliver   1
16:49, 9 July 2013 Figure 4. Units Conversion Window.jpg (file) 64 KB Oliver   1
16:18, 9 July 2013 Figure 8. e-corder and Potentiostat setup for EQCM work.jpg (file) 39 KB Oliver   1
16:18, 9 July 2013 Figure 7. Series Resistance expression, assuming Vc is monitored.jpg (file) 74 KB Oliver   1
16:18, 9 July 2013 Figure 6. Use this expression if using 1, 2, 5, 10, 20 kHz Scale Factor.jpg (file) 73 KB Oliver   1
16:18, 9 July 2013 Figure 5. Use this expression if using 200 and 500 Hz Scale Factor.jpg (file) 72 KB Oliver   1
16:18, 9 July 2013 Figure 3. Front of QCM200 unit.jpg (file) 38 KB Oliver   1
16:18, 9 July 2013 Figure 2. Rear of QCM200 unit.jpg (file) 32 KB Oliver   1
16:18, 9 July 2013 Figure 1. SRS QCM200 Quartz Crystal Microbalance.jpg (file) 68 KB Oliver   1
00:51, 9 July 2013 Figure 4. FIA extension integrates the peaks, fits a calibration curve and produces a report.jpg (file) 55 KB Oliver   1
00:51, 9 July 2013 Figure 3. The pump pushes the solution through the flow cell in the spectrophotometer. The change in absorbance is recorded by the e-corder.jpg (file) 72 KB Oliver   1
00:51, 9 July 2013 Figure 2. The spectrophotometer’s analog output “Rec” is connected to the e-corder using a banana plugs to BNC cable.jpg (file) 46 KB Oliver   1
00:51, 9 July 2013 Figure 1. e-corder connected to Jenway 6300 spectrophotometer.jpg (file) 83 KB Oliver   1
00:45, 9 July 2013 Figure 1. The Chart software gives a continuous live display of the gas concentration.jpg (file) 124 KB Oliver   1
00:43, 9 July 2013 Figure 2. The ethanol in the flask is heated by the hotplate. The ethanol vapour travels through the tubing to the Figaro TGS 2620 sensor.jpg (file) 86 KB Oliver   1
00:27, 9 July 2013 Figure 3. Metrohm 792 Basic IC with eDAQ C4D.jpg (file) 24 KB Oliver   1
00:27, 9 July 2013 Figure 2. The e-corder is connected to the Dionex DX-100 ion chromatograph using a banana plugs to BNC cable..jpg (file) 64 KB Oliver   1
00:27, 9 July 2013 Figure 1b. The analog output of the IC instrument and banana plugs to bare wires cable..jpg (file) 53 KB Oliver   1
00:27, 9 July 2013 Figure 1a. The ER280 PowerChrom connected to the Metrohm 690 IC..jpg (file) 80 KB Oliver   1
00:07, 9 July 2013 Figure 3. Waters 484 Tunable Absorbance Detector.jpg (file) 77 KB Oliver   1
00:07, 9 July 2013 Figure 4. Waters injection valve.jpg (file) 27 KB Oliver   1
00:07, 9 July 2013 Figure 2. Waters 430 Conductivity Detector.jpg (file) 52 KB Oliver   1
00:07, 9 July 2013 Figure 1. The ER280 PowerChrom System connected to a Waters HPLC.jpg (file) 90 KB Oliver   1
23:54, 8 July 2013 Figure 1. The PowerChrom System connected to the HP5890.jpg (file) 63 KB Oliver   1
23:54, 8 July 2013 Figure 3. Signal output and Remote output.jpg (file) 112 KB Oliver   1
23:53, 8 July 2013 DSC05962.jpg (file) 58 KB Oliver   1
23:45, 8 July 2013 Figure 4. Shimadzu GC-3BF.jpg (file) 79 KB Oliver   1
First page
Last page
Retrieved from "https://www.edaq.com/wiki/Special:ListFiles"