Difference between revisions of "Ion Chromatographs with PowerChrom"
(One intermediate revision by the same user not shown) | |||
Line 1: | Line 1: | ||
+ | [[File:Figure 3. Metrohm 792 Basic IC with eDAQ C4D.jpg|220px|thumb|right|Figure 3. Metrohm 792 Basic IC with eDAQ C4D]] | ||
''The PowerChrom or e-corder can be connected to ion chromatography (IC) instruments. The C4D Amp can be added as a contactless conductivity detector.'' | ''The PowerChrom or e-corder can be connected to ion chromatography (IC) instruments. The C4D Amp can be added as a contactless conductivity detector.'' | ||
=== Introduction === | === Introduction === | ||
− | Ion chromatographs that have an analog output can be connected to either the PowerChrom or e-corder. The PowerChrom software is then used to record and analyse the data. | + | Ion chromatographs that have an analog output can be connected to either the [http://www.edaq.com/powerchrom-system PowerChrom] or e-corder unit. The PowerChrom software is then used to record and analyse the data. |
The ion chromatograph’s “Inject” port can also be connected to the PowerChrom or e-corder, to trigger the start of recording. | The ion chromatograph’s “Inject” port can also be connected to the PowerChrom or e-corder, to trigger the start of recording. | ||
Line 17: | Line 18: | ||
| [[File:Figure 1b. The analog output of the IC instrument and banana plugs to bare wires cable..jpg|300px|thumb|right|Figure 1b. The analog output of the IC instrument and banana plugs to bare wires cable.]] | | [[File:Figure 1b. The analog output of the IC instrument and banana plugs to bare wires cable..jpg|300px|thumb|right|Figure 1b. The analog output of the IC instrument and banana plugs to bare wires cable.]] | ||
| [[File:Figure 2. The e-corder is connected to the Dionex DX-100 ion chromatograph using a banana plugs to BNC cable..jpg|300px|thumb|right|Figure 2. The e-corder is connected to the Dionex DX-100 ion chromatograph using a banana plugs to BNC cable.]] | | [[File:Figure 2. The e-corder is connected to the Dionex DX-100 ion chromatograph using a banana plugs to BNC cable..jpg|300px|thumb|right|Figure 2. The e-corder is connected to the Dionex DX-100 ion chromatograph using a banana plugs to BNC cable.]] | ||
− | |||
|} | |} |
Latest revision as of 16:37, 26 May 2014
The PowerChrom or e-corder can be connected to ion chromatography (IC) instruments. The C4D Amp can be added as a contactless conductivity detector.
Introduction
Ion chromatographs that have an analog output can be connected to either the PowerChrom or e-corder unit. The PowerChrom software is then used to record and analyse the data.
The ion chromatograph’s “Inject” port can also be connected to the PowerChrom or e-corder, to trigger the start of recording.
Add the eDAQ C4D Amp and you can detect your analytes with contactless conductivity detection.
Ion Chromatography with C4D Detection
Figure 3 shows the e-corder and EA120 C4D Amp connected to the Metrohm 792 Basic IC instrument.
Conductivity detection can be used for virtually all charged species: inorganic anions and cations, as well as organic ions, such as carboxylic acids, amines, amino acids, peptides, proteins, DNA fragments, antibiotics and many other pharmaceutical compounds.