Voltammetric techniques that require the current signal to be plotted versus potential most commonly use the EChem software. Techniques requiring that the current or potential signal be plotted versus time are typically performed with the Chart software. This table indicates which software is better suited for a particular technique.
Electrochemistry Technique |
EChem Software |
Chart Software
|
Example |
Example |
Example
|
Linear sweep voltammetry || * || Example
potentiodynamic polarization
polarization resistance
Differential pulse voltammetry
Square wave voltammetry
Normal (and reverse) pulse voltammetry
Linear sweep stripping voltammetry
Differential pulse stripping voltammetry
Square wave stripping voltammetry
Normal pulse stripping voltammetry
Cyclic voltammetry
cyclic potentiodynamic polarization scanning
MultiPulse voltammetry
non-standard sampling for linear sweep voltammetry
non-standard sampling for cyclic voltammetry
cyclic square wave voltammetry
cyclic differential pulse voltammetry
Pulse Amperometry
differential pulse amperometry
double pulse amperometry
constant potential electrolysis
differential normal pulse voltammetry
double pulse voltammetry
Chronoamperometry
Chronocoulometry
Chronopotentiometry
Controlled Potential Electrolysis
Controlled Current Electrolysis
Electrosynthesis
Rotating Ring Disk Electrodes *
Quartz Crystal Microbalance *
Amperometric detection (for chromatography)
Monitoring of meters for biosensors, pH and ion selective electrodes, conductivity electrodes and dO2 sensors *