ET096 Mini-Hydrogen Electrode
ET096 Mini-Hydrogen Electrode
- No activation is necessary
- Can be used up to 80°C
- Works without inner electrolyte
- Length of electrode shaft can be customized
The ET096 is a small hydrogen electrode. The head is made from PP and the shaft from PEEK. The diameter of the shaft is just 1.6 mm and the length of the shaft can be customized. The head has a G 1/8'' BSP thread but it can also be used without being screwed in. The connector lead is the same as used for the standard HydroFlex electrode. The has a hydrogen generating button cell that lasts 12 months and can be replaced with the ET097 Replacement Hydrogen Source.
- The head is made from PP and the shaft from PEEK.
- The diameter of the shaft is just 1.6 mm and the length of the shaft can be customized.
- The head has a G 1/8'' BSP thread
-
Can cover the full pH range from -2 to 16
-
Can be used with acids and alkali and fluorine containing electrolytes
-
Can operate from 210C and 10bar
Your Shopping Cart: empty
- Potentiostats
- EIS Electrochemical Impedance Spectroscopy
- Contactless Conductivity Detectors C4D
- Separation Science
- PowerChrom Chromatography
- isoPods™ Meters
- Laboratory Data Acquisition
- SDx Tethered Membranes
- Electrodes, Transducers, Accessories
- Software
- Kits and Bundles
- Complete Product List
- Specials
