ET1600  pH Micro Electrode



ET1600 pH Micro Electrode
ET1600 pH Micro Electrode
 
  • Can be used with tiny sample volumes of 500 nanoliter (nL)
  • pH range: 2-12
  • Choice of tip diameters and electrode lengths
 

 

This miniature combination pH electrode can be used with samples which have a very low volume of 500 nanoliter (nL) or greater. It is suitable for use in flow through systems. It is a combination electrode, so a separate reference electrode is not required. It is suitable for use with the EPU353 and EP353 pH and ISE isoPods, the EPU452 Quad Multi Function isoPod and the EU168 Quad pH Amp.

The standard model has tip diameter of 1600 µm and a length of 20 mm. The active tip is less than 1 mm long. Other dimensions are available on special order: tip diameters of 650 µm, 1000 µm or 1600 µm and electrode lengths of 20, 50 or 75 mm.

Videos

The isoPods for Recording Temperature, pH, Conductivity and Dissolved Oxygen
 

View more related videos on the Screencast Training Videos Wiki

 
  • Tip diameter: 1600 µm standard, 650 and 1000 µm available on special order*
  • Tip length: 20 mm standard, 50 and 75 mm available on special order*
  • Construction: PEEK body with thin polyester outer film
  • Active tip: Under 100 um
  • Minimum sample volume: 500 nL (nanolitre)
  • Response time: 90% response in under 5 seconds    
  • Temperature range: 5-90 °C
  • Internal Reference: Ag/AgCl
  • Slope: Nernstian
  • pH range: 2-12
  • Storage: pH 7
  • Connector: BNC
  • Electrode holder: 5 mm diameter x 75 mm length
  • Cable length: 1200 mm

* Special orders are built to customer specifications and no returns are accepted.



 

© copyright 2002 - 2019   eDAQ - data recording made simple
       website by frogwebworks
© copyright 2002 - 2019   eDAQ - data recording made simple
website by frogwebworks
© copyright 2002 - 2019 eDAQ - data recording made simple website by frogwebworks
© copyright 2002 - 2019 eDAQ - data recording made simple
website by frogwebworks