See the brochure for more details.

Results Below are from Google Scholar

One-step anodization deposition of anticorrosive bioceramic compounds on AZ31B magnesium alloy for biomedical application

HM Mousa, KH Hussein, HM Woo, CH Park… - Ceramics International, 2015 - Elsevier

... 2.4. Potentiodynamic polarization test. Electrochemical tests were carried out using a
ZIVE SP1 potentiostat/galvanostat/EIS device connected to a cell with an SBF solution
controlled at 37±1 °C and a pH value of 7.4. The potentiodynamic ...

Cited by 16 Related articles All 2 versions

Co 9 S 8–carbon composite as anode materials with improved Na-storage performance

YN Ko, YC Kang - Carbon, 2015 - Elsevier

... Cyclic voltammograms (CVs) were recorded at a scan rate of 0.1 mV s −1 . Electrochemical
impedance spectra were obtained by AC electrochemical impedance spectroscopy (EIS), using
a ZIVE SP1, over a frequency range of 0.01 Hz–100 kHz, using a potential of 10 mV. ...

Cited by 32 Related articles All 2 versions

[PDF] thenanoresearch.com

Aerosol-assisted rapid synthesis of SnS-C composite microspheres as anode material for Na-ion batteries

SH Choi, YC Kang - Nano Research, 2015 - Springer

... capacities of this study were based on the total weight of the SnS-C composite.
Electrochemical impedance spectroscopy (EIS) was performed using a ZIVE SP1
over a frequency range of 0.01–100 kHz. 3 Results and discussion ...

Cited by 28 Related articles All 4 versions

[PDF] researchgate.net

Growth mechanism and structure of electrochemically synthesized dendritic polymethylsilane molecules

A Mavrič, A Badasyan, G Mali, M Valant - European Polymer Journal, 2017 - Elsevier

... A potential between the Pt reference electrode and the Al cathode was measured with a
potentiostat (ZIVE SP1, WonATech, Seoul, Korea) in an open circuit mode. After the electrolysis
the solvent and volatile compounds were removed under reduced pressure. ...

Cited by 1 Related articles All 4 versions

Bi-functionality of mesostructured MnCo 2 O 4 microspheres for supercapacitor and methanol electro-oxidation

GM Thorat, HS Jadhav, JG Seo - Ceramics International, 2017 - Elsevier

... All the electrochemical tests were carried out on a ZIVE SP1 electrochemical workstation
(Won-A-Tech Co. ... The electro-catalytic activities of the MnCo 2 O 4 electrodes, for the oxidation
of methanol, were investigated on a ZIVE SP1 electrochemical workstation. ...

Cited by 5 Related articles All 3 versions

[PDF] researchgate.net

Silver dendrites decorated filter membrane as highly sensitive and reproducible three dimensional surface enhanced Raman scattering substrates

B Zhao, Y Lu, C Zhang, Y Fu, S Moeendarbari… - Applied Surface …, 2016 - Elsevier

... Potentials were applied to the working electrode using ZIVE SP1 potentiostat (Wonatech,
Korea). An Ag/AgCl electrode in 3 M NaCl solution and a platinum mesh were used as the
reference electrode (RE) and the counter electrode (CE), respectively. ...

Cited by 8 Related articles All 5 versions

[PDF] researchgate.net

Solution-processed transparent conducting Ag nanowires layer for photoelectric device applications

HS Kim, M Patel, H Kim, JY Kim, MK Kwon, J Kim - Materials Letters, 2015 - Elsevier

... The Mott-Schottky analyses (C–V characteristics) of photoelectric devices were obtained by
applying AC signal (0.1 mV) in the frequency ranges 10–500 kHz by sweeping DC bias range
from −0.6 V to +0.6 V using the Potentiostat/Galvanostat (ZIVE SP1, WonA Tech). ...

Cited by 6 Related articles All 3 versions

[HTML] rsc.org

[HTML] Synthesis and electrochemical properties of spherical and hollow-structured NiO aggregates created by combining the Kirkendall effect and Ostwald ripening

JS Cho, JM Won, JH Lee, YC Kang - Nanoscale, 2015 - pubs.rsc.org

... 1 cm × 1 cm and the mass loading was approximately 1.2 mg cm −2 . Electrochemical impedance
spectra were obtained by AC electrochemical impedance spectroscopy (EIS) with a ZIVE SP1
over a frequency range of 0.01 Hz–1000 kHz and at a potential amplitude of 10 mV. ...

Cited by 20 Related articles All 6 versions

[HTML] rsc.org

Vacuum-process-based dry transfer of active layer with solvent additive for efficient organic photovoltaic devices

JH Lee, KM Kim, W Jang, S Ahn, YY Kim… - Journal of Materials …, 2017 - pubs.rsc.org

... For measurement of impedance of the devices, an impedance analyzer (WonAtech,
Zive SP1) was used. UV-Vis spectrophotometry (Cary 100, Vetiran) was used to obtain
absorption spectra. Impedance measurement was done ...

Cited by 1 Related articles

 [HTML] Optical properties and impedance spectroscopy analyses for microscale Si pillar solar cells

M Patel, J Kim - Data in Brief, 2017 - Elsevier

... Subject area, Physics, Electrical Engineering. More specific subject area, Solar cells. Type of
data, Figures, Table. How data was acquired, UV-visible spectrophotometer (UV-2600, Shimadzu),
Potentiostat/Galvanostat (ZIVE SP1, WonA Tech, Korea). Data format, Analyzed. ...

All 3 versions  

Effects of brush-anode configurations on performance and electrochemistry of microbial fuel cells

H Kang, J Jeong, PL Gupta, SP Jung - International Journal of Hydrogen …, 2017 - Elsevier

... Measurements of polarization, EIS and CV were performed using a potentiostat/
galvanostat/impedance analyzer (ZIVE SP1, Wonatech, Seoul, South Korea). For
polarization tests, the MFC reactor was operated in open circuit ...

All 3 versions

[HTML] sciencedirect.com

[HTML] Sample preparation and electrochemical data of Co 3 O 4 working electrode for seawater splitting

M Patel, WH Park, A Ray, J Kim, JH Lee - Data in Brief, 2017 - Elsevier

... All measurements were done using the three electrode electrochemical cells (Reference electrode:
Ag/AgCl (KCl, 3 M), Counter electrode: platinum gauze, and working electrode: Co 3 O 4
/FTO/glass) attached to the Potentiostat/Galvanostat (PG-stat) (WonA Tech, ZIVE SP1). ...

All 3 versions

Electrochemical growth of Co (OH) 2 nanoflakes on Ni foam for methanol electro-oxidation

A Roy, H Jadhav, GM Thorat, JG Seo - New Journal of Chemistry, 2017 - pubs.rsc.org

... Saturated Calomel Electrode (SCE) for 5 minutes at room temperature using a ZIVE SP1
electrochemical workstation (Won-A-Tech Co. LTD, South Korea). The electrodeposited ... electrodes
for methanol oxidation were performed on a ZIVE SP1 electrochemical workstation. ...

[PDF] researchgate.net

One-pot synthesis of core–shell-structured tin oxide–carbon composite powders by spray pyrolysis for use as anode materials in Li-ion batteries

YJ Hong, YC Kang - Carbon, 2015 - Elsevier

... measurements were carried out at a scan rate of 0.1 mV s −1 between 0.001 and 3 V.
Electrochemical impedance spectra of the core–shell-structured tin oxide–carbon composite
powder and the bare SnO 2 powder were analyzed using ZIVE SP1 instrument (Wonatech, Korea ...

Cited by 9 Related articles All 4 versions

[HTML] sciencedirect.com

[HTML] Electrical circuit model of ITO/AZO/Ge photodetector

M Patel, J Kim - Data in Brief, 2017 - Elsevier

... Type of data, Figures, Table. How data was acquired, Potentiostat/Galvanostat (ZIVE SP1, WonA
Tech, Korea). Data format, Analyzed. Experimental factors, Impedance spectroscopy: Frequency
range 1 Hz to 20 kHz Bias range → -0.5 V to 0.5 V in step of 0.1 V. ...

All 3 versions

[HTML] sciencedirect.com

[HTML] Physical, chemical, and optical data of SnS layers and light switching frequency dependent photoresponses

M Patel, HS Kim, J Kim - Data in Brief, 2017 - Elsevier

... UV-visible diffused reflectance photo spectrometer (Simadzu, UV-2600). Potentiostat/Galvanostat
(ZIVE SP1, WonA Tech, Korea). Data format, Analyzed. Experimental factors, FESEM (Working
distance 10 mm, 15 kV, specimen without conducting coating). ...

All 3 versions

[HTML] mdpi.com

[HTML] Effect of laser surface treatment on the corrosion behavior of FeCrAl-coated TZM alloy

JM Kim, TH Ha, JS Park, HG Kim - Metals, 2016 - mdpi.com

... Smartlab, Tokyo, Japan). Electrochemical measurements were performed using a
potentiostat and an electro impedance spectroscopy (EIS) analysis software (ZIVE
SP1, WONATECH, Seoul, Korea). Saturated calomel electrode ...

Cited by 5 Related articles All 6 versions

Electrochemical properties of CuO hollow nanopowders prepared from formless Cu–C composite via nanoscale Kirkendall diffusion process

JM Won, JH Kim, YJ Choi, JS Cho, YC Kang - Journal of Alloys and …, 2016 - Elsevier

... voltammograms were measured at a scan rate of 0.07 mV s −1 . Electrochemical impedance
spectra were obtained by AC electrochemical impedance spectroscopy (EIS) with a ZIVE SP1
over a frequency range of 0.01 Hz–100 kHz and at the potential amplitude of 10 mV. ...

Cited by 4 Related articles All 2 versions

[PDF] researchgate.net

High potential for the optimum designs for a front contact and junction: A route to heterojunction solar cell

HS Kim, P Yadav, M Patel, H Kim, K Pandey… - Solar Energy Materials …, 2016 - Elsevier

... The Mott-Schottky analysis (1/C 2 –V characteristics) of photoelectric devices were obtained by
applying an AC signal (10 mV) in the frequency range of 10–500 kHz by sweeping the DC bias
from −0.4 V to +0.6 V using the Potentiostat/Galvanostat (ZIVE SP1, WonA Tech). Fig. ...

Cited by 1 Related articles All 4 versions

Morphological engineering via processing additive in thin film bulk-heterojunction photovoltaic cells: A systematic understanding of crystal size and charge transport

W Jang, YJ Kim, S Ahn, S Park, CE Park… - Current Applied …, 2016 - Elsevier

... 2.2. Characterization. The performances of the organic solar cells were measured using a solar
simulator, with Air Mass 1.5 Global (AM 1.5 G) at an intensity of 100 mW/cm 2 , and the current
density-voltage characteristics of the solar cells was measured using ZIVE SP1. ...

Cited by 1 Related articles All 4 versions

• Potential range: ±10V
• Current ranges: 100 nA, 1, 10, 100 µA, 1, 10, 100 mA, 1 A
• Current resolution: 16 bits:
• Current Accuracy:  0.02% f.s
• Frequency Responce Analyser for EIS: 10 µHz to 1 MHz
• 12 EIS techniques (including Multi-Sine)
• Capable of Bipolar Pulse technique
• Voltage pulse or current pulse charge/discharge test (GSM,CDMA etc.)
• Ripple simulation available in Battery test package.
• Pulse plating available
• Internal 350,000 data point storage
• Dimendions: 160 x 324 x 76 mm  /  2 kg
• Includes software packages for:
  - corrosion testing
  - EIS
  - electrochemical analysis
  - battery testing
• Warranty: 12 months