Zahner EPC42 Addon-card



The EPC42 is a controller module for external potentiostats. Each EPC42 is able to address up to 4 PP/EL/XPot devices. Up to four EPC42 cards can be installed in an IM6 or a ZENNIUM system. In total, an IM6 and a ZENNIUM is able to control up to 16 external PPs/XPots.


Each potentiostat will hold all its values from one control access to the next one so that no potential or current disturbances will occur while scanning a series of potentiostats. If Automatic Series Measurements are performed with more than one PP-series device connected, spectra are taken from all modules in a user-defined order.

Photos [ click on the thumbnails below to view large images ]

EPC42 Controller Card for External Potentiostats 4 Channel

Controller module
Channels 4
Socket Lemosa FGG.1B.308.CLAD72
Control voltage range ±4 V
Control voltage resolution 16 Bit
Supported external devices all EL-Series, PP-Series and XPot