EPU354  Dissolved Oxygen isoPod™ with USB

EPU354 Dissolved Oxygen isoPod™  with USB
EPU354 Dissolved Oxygen isoPod™ with USB
  • Works with most polarographic O2 sensors
  • Direct USB connection to computer
  • Graphic and tabular display with Pod-Vu software
 
Unit Price: $ (USD) 450.00
 

 

A compact signal conditioner for monitoring polarographic dissolved oxygen electrodes (Clark electrode).

Electrical isolation minimizes interference with nearby pH, conductivity, ISE and similar sensors used in multi–parametric studies.

Connects directly to computer USB port, or via a USB hub, and appears as a virtual serial port (COM3, COM4, etc) and uses a serial protocol. Compatible with LabVIEW, HyperTerminal, etc. You can also use eDAQ Pod-Vu software to log and graph signals directly to a Windows XP or later computer.

This isoPod requires a computer with a virtual COM port (VCP) driver from FTDI installed.

Videos

The isoPods for Recording Temperature, pH, Conductivity and Dissolved Oxygen
 
Serial Port Monitor for hardware which use serial ports (isoPods, HVS)
 

View more related videos on the Screencast Training Videos Wiki

 
  • Input Socket:   BNC
  • Ranges (and resolution):
        20 nA   (6.25 fA)
        200 nA   (62.5 fA)
        2 µA   (625 fA)
        20 µA   (6.25 pA)
  • Zero offset: ±20 µA
  • Polarization: -1000 to -500 mV
  • Isolation: > 250 Vrms
  • Size:   108 x 58 x 35 mm;   200 g