EPU452 Quad Multi Function isoPod™ with USB

Up to four channels available
Each channel can be configured for a different sensor
Electrical isolation on each channel
USB plug and play connectivity
Customise operation with your own LabVIEW applications or use Pod-Vu software (included)

Available in a Special Kit including 5 electrodes and software

Unit Price: $ (USD) 3265.00

Overview
Photos & Videos
Specifications
More Information

Compatible with Multiple Probes

Using its MF Configuator software, each channel can be independently configured and calibrated for a particular type of sensor:

pH, ion selective electrode (ISE), Oxidation Reduction Potential (ORP)
Temperature (1000 ohm RTD or 30 kohm thermistor)
Dissolved oxygen (dO₂)
Solution conductivity
Amperometric biosensors
Voltage (mV)

Thus the instrument can have four pH channels, or one each of pH, conductivity, dO₂ and temperature, or any other combination!

Pod-Vu Software Included

Online monitoring of the signals from the different channels, using Windows XP or later computers, is facilitated by Pod-Vu software. You can record signals from one or two Quad MF isoPod units (that is up to eight signals simultaneously).

Customise with your Own Software

You can also write your own recording or process control software using the 'virtual serial protocol' provided over the isoPod's USB interface. The serial protocol can be accessed by:

Writing your own software, for example in LabVIEW, C#, Visual Basic, etc.
Terminal emulation software compatible with serial (COM) ports, eg TeraTerm, HyperTerminal.
Other serial (COM) port compatible software that can log responses into a file or Excel document, eg WinWedge, HyperAccess.

OS Compatibility

The EPU452 is a multi-platform device that uses a 'USB CDC serial port' which is defined in the USB standard. Thus it is compatible with any operating system that supports a USB CDC serial port. This includes Windows, Mac OS X, and Linux. Please note, however, that MF Configurator and Pod-Vu software are only available for Windows XP and later computers.

Photos[ click on the thumbnails below to view large images ]

Videos

The isoPods for Recording Temperature, pH, Conductivity and Dissolved Oxygen

Serial Port Monitor for hardware which use serial ports (isoPods, HVS)

View more related videos on the Screencast Training Videos Wiki

General

Input connectors: 4, BNC.
Computer connection: USB, Type B socket. Cable supplied.
Isolation: > 250 Vrms independent on each channel.
Power: 500 mA @ 5 V DC. Mains adaptor supplied.
Dimensions: 170 x 130 x 35 mm.
Weight: ~800 g.

Voltmeter

Input impedance: 10¹³ ohm.
Input ranges: ±2000 mV.

pH & ISE

Input impedance: > 10¹² ohm.
Input ranges: ±2000 mV (> pH 0 – 14), ±200 mV (pH 3.6 – 10.4).
Calibration: Single or double point (with Pod-Vu or MF Configurator software).

Conductivity

Input ranges: 200, 20, 2, 0.2, 0.02 and 0.002 mS.
Calibration: Single point. Conductivity or TDS.

RTD

Probe type: 1000 ohm platinum RTD.
Probe error: ±(0.10 + n/600) °C at n°C with ET021 RTD probe.
Temperature range: –25 to +125°C.

Thermistor

Probe type: 30 kohm thermistor.

Dissolved Oxygen dO₂

Input ranges: ±2 mA, ±200, ±20, ±2 µA, ±200, ±20 nA.
Polarization: 0, then –500 to –1000 mV in 50 mV steps (with Pod-Vu or MF Configurator software).
Zero offset range: ±20 µA.
Typical RMS noise: 1 pA when sampling at 1/s.
Calibration: Single or double point (with Pod-Vu or MF Configurator software) .

Biosensor

Input ranges: ±2 mA, ±200, ±20, ±2 µA, ±200, ±20 nA.
Polarization range: ±2000 mV in millivolt steps.
Zero offset range: ±20 µA.
Typical RMS noise: 1 pA when sampling at 1/s.
Calibration: Single or double point (with Pod-Vu or MF Configurator software).

More Information

EPU452_Quad_Multi_Function_isoPod (300 KB PDF)

Add to Shopping Cart

Also see:

ES350 Pod-Vu Software

ER7006 MultiSensor Teaching Kit