ER7006  MultiSensor Teaching Kit

ER7006 MultiSensor Teaching Kit
ER7006 MultiSensor Teaching Kit
  • Multi-function meter
  • Electrodes for pH, dO2, conductivity and more
  • Software for collecting and graphing data
 

 

This kit includes all the hardware, software and electrodes to develop a range of experiments for teaching students about sensors and biosensors used in chemistry and biochemistry.

You can reconfigure the Quad MF isoPod yourself to measure pH, temperature, conductivity, dissolved oxygen, voltage and amperometric sensors.

Instead of buying separate meters to record pH, temperature, conductivity etc, this economical and flexible precision instrument will do it all in one.

The kit includes Pod-Vu software for collecting and plotting data. You can also use your own software such as LabVIEW, C#, or use WinWedge or HyperAccess to log the data directly into Excel. The EPU452 connects directly to the computer using USB.

The Basic Sensor Kit includes:

Photos[ click on the thumbnails below to view large images ]

EPU452 with conductivity, RTD temperature, dissolved oxygen and pH electrodes EPU452 with conductivity, RTD temperature, dissolved oxygen and pH electrodes EPU452 with conductivity, RTD temperature, dissolved oxygen and pH electrodes

 
Specifications for the EPU452 Quad MF isoPod (see individual product webpages for specifications of electrodes):
 
General
  • Input connectors:    4, female BNC.
  • Computer connection:    USB, Type B socket. Cable supplied.
  • Isolation:    > 250 Vrms independent on each channel
  • Power:    500 mA @ 5 V DC. Main adaptor supplied.
  • Dimensions:    170 x 130 x 35 mm
  • Weight:    ~800 g
Voltmeter
  • Input impedance:    1013 ohm
  • Input ranges:    ±2000 mV
pH & ISE
  • Input impedance:    > 1012 ohm
  • Input ranges:    ±2000 mV (> pH 0 – 14), ±200 mV (pH 3.6 – 10.4)
  • Calibration:    Single or double point (with Pod-Vu or MF Configurator)
Conductivity
  • Input ranges:    200, 20, 2, 0.2, 0.02 0.002 mS
  • Calibration:    Single point. Conductivity or TDS
Thermistor
  • Probe type:    30 kohm thermistor
  • Probe error:    ±0.2 °C (0 to 70°C) with ET020 Thermistor Probe
  • Temperature range:    –25 to +125°C
dO2
  • Input ranges:    ±2 mA, ±200, ±20, ±2 µA, ±200, ±20 nA
  • Polarization:    0, then –500 to –1000 mV in 50 mV steps (with Pod-Vu or MF Configurator)
  • Zero offset range:    ±20 µA
  • Typical RMS noise:   1 pA when sampling at 1/s
  • Calibration:    Single or double point (with Pod-Vu or MF Configurator) 
Biosensor
  • Input ranges:    ±2 mA, ±200, ±20, ±2 µA, ±200, ±20 nA
  • Polarization range:    ±2000 mV in millivolt steps
  • Zero offset range:    ±20 µA
  • Typical RMS noise:    1 pA when sampling at 1/s
  • Calibration:    Single or double point (with Pod-Vu or MF Configurator)