Chromatography

Many brands and models of chromatograph can be connected to either an e-corder system, using Chart or PowerChrom software, or a PowerChrom system.

For simple preparative chromatography you may find e-corder with Chart software meets your requirements. The simple user interface mimics the controls of a paper recorder but signals are recorded with much greater accuracy, and of course are stored safely on your computer.

For analytical chromatography PowerChrom is recommended. It supports multiple method and calibration documents and can be used for sophisticated chromatographic analysis.

Contactless Conductivity

The C4D (contactless conductivity detector) can be used as a detector in ion chromatography (IC) and high-performance liquid chromatography (HPLC). Installation is easy as the HPLC/IC tubing (1/16 inch, 1/32 inch or other) is simply fed into the ET125 General Purpose headstage. The ER225 C4D Data System is then used with PowerChrom software to record the conductivity of the solution following though the tubing. See this application note for details. The C4D was used for the determination of underivatized long chain fatty acids using RP-HPLC (doi: 10.1016/j.talanta.2009.11.030).

 


DISCLAIMER: The appearance of a third party company or product on this page is for informational purposes and constitutes neither a recommendation nor an endorsement.


© copyright 2002 - 2024   eDAQ - data recording made simple
       website by frogwebworks
© copyright 2002 - 2024   eDAQ - data recording made simple
website by frogwebworks
© copyright 2002 - 2024 eDAQ - data recording made simple website by frogwebworks
© copyright 2002 - 2024 eDAQ - data recording made simple
website by frogwebworks