ET1600 pH Micro Electrode
ET1600 pH Micro Electrode
- Can be used with tiny sample volumes of 500 nanoliter (nL)
- pH range: 2-12
This miniature combination pH electrode can be used with samples which have a very low volume of 500 nanoliter (nL) or greater. It is suitable for use in flow through systems. It is a combination electrode, so a separate reference electrode is not required. It is suitable for use with the EPU353 and EP353 pH and ISE isoPods, the EPU452 Quad Multi Function isoPod and the EU168 Quad pH Amp.
Tip diameter 1600 µm and length 20 mm. The active tip is less than 1 mm long.
- Tip diameter: 1600 µm
- Tip length: 20 mm
- Construction: PEEK body with thin polyester outer film
- Active tip: Under 100 um
- Minimum sample volume: 500 nL (nanolitre)
- Response time: 90% response in under 5 seconds
- Temperature range: 5-90 °C
- Internal Reference: Ag/AgCl
- Slope: Nernstian
- pH range: 2-12
- Storage: pH 7
- Connector: BNC
- Electrode holder: 5 mm diameter x 75 mm length
- Cable length: 1200 mm
More Information
Also see:
EPU353 pH/ISE isoPod with USB
EP353 pH and ISE isoPod
EPU452 Quad Multi Function isoPod with USB
EU168 Quad pH Amp with USB
ET042 pH Electrode
ET060 Redox Electrode
ET5733 pH Electrode - Tuff Tip
ET044 Flow Thru pH electrode
Your Shopping Cart: empty
- Potentiostats
- EIS Electrochemical Impedance Spectroscopy
- Contactless Conductivity Detectors C4D
- Separation Science
- PowerChrom Chromatography
- isoPods™ Meters
- Laboratory Data Acquisition
- Battery Research
- SDx Tethered Membranes
- Electrodes, Transducers, Accessories
- Software
- Kits and Bundles
- Complete Product List
- Specials
