ES260  EChem Electrochemistry Software for Voltammetric Techniques

ES260 EChem Electrochemistry Software for Voltammetric Techniques
ES260 EChem Electrochemistry Software for Voltammetric Techniques


eDAQ EChem software is designed for the collection, display and analysis of data from electroanalytical voltammetric experiments.

eChem Startup Kit Need equipment?
See the EChem Startup System a complete system with software, data recording unit, potentiostat and electrodes, which is ideal for those wanting to include voltammetric experiments in their undergraduate course, or for researchers who want a system for cyclic voltammetry.

With an e-corder system EChem software is fully compatible with the modular EA163 Potentiostat, high sensitivity EA362 Dual Picostat and four-channel EA164 QuadStat. EChem can also be used with the ER466 Integrated Potentiostat.

EChem uses the e-corder recording systems as the digital waveform generator, and data acquisition system. Thus even non-scanning potentiostats can be upgraded to the full range of EChem techniques. The potentiostat should have an 'external input' and current and potential recorder outputs. Most analog potentiostats are suitable.

EChem version 2 has improved resolution (16 bit sampling, with 32 bit floating point averaging), and faster scan rates (to about 100 V/s) than earlier versions.


EChem supports the following electrochemical techniques:

  • Linear (Staircase) Sweep Voltammetry
  • Normal Pulse Voltammetry
  • Square Wave Voltammetry
  • Differential Pulse Voltammetry
  • Cyclic Voltammetry
  • Differential Pulse Amperometry

All voltammetric techniques are also supported in stripping mode.

EChem also features the Multi Pulse Voltammetry technique to design your own potential waveform using a staircase ramp and up to two pulses per step. Experiment with new techniques such as Cyclic Square Wave Voltammetry.

The Chart and Scope software, supplied with the e-corder, support:

  • Chronoamperometry
  • Chronocoulometry
  • Chronopotentiometry
  • Controlled potential/current electrolysis

For the full list of electrochemical techniques supported by EChem and Chart, see the Software for Electrochemistry Techniques application note.

Export Friendly

You can export raw or smoothed voltammograms (as graphics or tabular data) to other graphing software, word processors, and spreadsheets.

Transformed Data

Smooth, differentiate or integrate signals; the raw signal is always maintained. Reassign the zero point of the potential axis of a voltammogram to show data relative to a different reference electrode.

Digital Signal Processing

EChem gives the highest quality data possible from your potentiostat. EChem averages the current signal over a 'sampling period' for each data point gathered. The signal-to-noise ratio of a signal is improved by a factor of the square root of 'n' when 'n' readings are averaged.

Research Areas

Application Notes


  • Utilising gallium for enhanced electrochemical copper analysis at the bismuth film electrode.   Chad Prior, Claire E. Lenehan, and G. Stewart Walker.  Analytica Chimica Acta,  598, 65-73, 2007.
  • Single-walled carbon nanotube/trititanate nanotube composite fibers.   Chonlada Dechakiatkrai, Carol Lynam, Kerry J. Gilmore, Jun Chen, Sukon Phanichphant, Dmitry V. Bavykin, Frank C. Walsh,  and Gordon G. Wallace.    Advanced Engineering Materials, 11, B55-B60, 2009.
  • Structural Characterization of Zinc and Iron (II/III) Complexes of a Porphyrin Bearing Two Built-in Nitrogen Bases. An Example of High-Spin Diaqua-Iron(III) Bromo Complex.   Ismail Hijazi, Thierry Roisnel, Pascale Even-Hernandez, Florence Geneste, Olivier Cador, Thierry Guizouarn and Bernard Boitrel.   Inorganic Chemistry, 49, 7536–7544, 2010.
  • Novel neural interface for implant electrodes: improving electroactivity of polypyrrole through MWNT incorporation.   R. A. Green, C. M. Williams, N. H. Lovell and L. A. Poole-Warren.   Journal of Materials Science: Materials in Medicine, 19, 1625-1629, 2008.
  • Application of Anodic Stripping Voltammetry for Zinc, Copper, and Cadmium Quantification in the Aqueous Humor: Implications of Pseudoexfoliation Syndrome.   Vassiliki S. Panteli, Dimitra G. Kanellopoulou, Sotirios P. Gartaganis and Petros G. Koutsoukos.   Biological Trace Element Research,  132, 9-18, 2009.
  • Analytical performances of a flow electrochemical sensor for preconcentration and stripping voltammetry of metal ions.   Rihab Nasraoui, Didier Floner, and Florence Geneste.   Journal of Electroanalytical Chemistry, 629, 30-34, 2009.
  • Prussian Blue-modified microelectrodes for selective transduction in enzyme-based amperometric microbiosensors for in vivo neurochemical monitoring.   P. Salazar, M. Martína, R. Roche, R.D. O’Neill, and J.L. González-Mora.   Electrochimica Acta, 55, 6476-6484, 2010.
  • Characterization of Hemoglobin Immobilized in MgAl-Layered Double Hydroxides by the Coprecipitation Method.   Khaled Charradi, Claude Forano, Vanessa Prevot, Dominique Madern, Abdesslem Ben Haj Amara, and Christine Mousty.   Langmuir, 26, 9997–10004, 2010.

More Information

ES260_EChem_software (390 KB PDF)

EA161_Potentiostat (100 KB PDF)

EA162_Picostat (70 KB PDF)

EA164_QuadStat ( Warning: filesize(): stat failed for product_sheets/amps/EA164_QuadStat.pdf in /www/frog/scripts/product-details.php on line 26 0 B PDF)

Request price information

Ordering: ES260 EChem Electrochemistry Software for Voltammetric Techniques

Also see:

e-corder intro page

ET014 EChem Electrode Kit

FREE Software Trial

To obtain a temporary 4 week license to evaluate eDAQ software, please send your request to



© copyright 2002 - 2024   eDAQ - data recording made simple
       website by frogwebworks
© copyright 2002 - 2024   eDAQ - data recording made simple
website by frogwebworks
© copyright 2002 - 2024 eDAQ - data recording made simple website by frogwebworks
© copyright 2002 - 2024 eDAQ - data recording made simple
website by frogwebworks